Atlanta homes built before 1970 in neighborhoods like Inman Park and Virginia-Highland often have original wood or galvanized gutters that sag under the weight of summer downpours and leaf debris from mature oaks. Replacement requires checking fascia boards for rot caused by repeated moisture in the humid subtropical climate, then installing new seamless aluminum or copper runs with correct pitch to move water away from foundations on the gently rolling terrain common in Fulton County.
Buckhead and Sandy Springs properties frequently need full replacement when existing five-inch gutters cannot handle the volume of rain that falls during afternoon thunderstorms. We remove old sections, inspect for hidden damage at the roofline, and install new six-inch seamless gutters with proper hangers every two feet to withstand wind-driven rain that reaches the area from the west. Mild winters mean we rarely deal with ice dams, but constant humidity accelerates corrosion on steel components.
Gutter Replacement Near You — Choose Your City
Every city below has its own local Gutter Replacement page with coverage details.
Other areas
Fulton
DeKalb
Gwinnett
Cobb
Houston County
Cobb County
Fayette County
Henry
Muscogee
Chatham County
Fulton County
Dougherty
Lowndes
Hall
Coweta
Gwinnett County
Floyd
Douglas
Cherokee
DeKalb County
Columbia
Cherokee County
Liberty
Whitfield County
Bulloch
Troup
Chatham
Carroll County
Bartow County
Spalding County
Camden County
Clayton County
Barrow
East Atlanta and Grant Park homes sit on lots with slight slopes toward the street or alley, so replacement includes extending downspouts or adding splash blocks to prevent erosion near crawl spaces. We match gutter profiles to the architectural style of these early-20th-century houses while ensuring the new system ties into existing underground drains where present. Work is scheduled around the long daylight hours available from spring through fall.
Technician insight
In Atlanta the thing that catches most people out with gutter replacement is rotted fascia on pre-1960 homes in places like Virginia-Highland and Old Fourth Ward; the constant humidity keeps wood damp even through mild winters, so we always pull a few sections to check before quoting.
Midtown two-story replacement
Homeowner called after water was pooling near the foundation during summer storms. We found sagging original gutters and soft fascia on the rear elevation. Replaced the full perimeter with seamless aluminum six-inch gutters, repaired two fascia boards, and added extended downspouts. Water now flows cleanly into the existing drain line.
Gutter Replacement Services We Offer
✓Seamless Aluminum Gutter Replacement
Removes old sectional gutters and installs continuous aluminum runs sized for Atlanta rainfall volumes in neighborhoods like Midtown and Buckhead.
✓Copper Gutter Replacement
Replaces deteriorated gutters with copper on historic Fulton County homes in Inman Park and Virginia-Highland where architectural matching is required.
✓Six-Inch Gutter Upgrade
Replaces five-inch systems with larger six-inch seamless gutters to handle heavy summer storms common across East Atlanta and Grant Park.
✓Fascia Board Repair During Replacement
Inspects and repairs rotted fascia while performing gutter replacement on older homes in Old Fourth Ward and West End affected by prolonged humidity.
✓Downspout Extension Installation
Adds or extends downspouts during replacement to direct water away from foundations on sloped lots in Decatur and Sandy Springs.
Gutter Replacement Cost in Georgia
| Service | Typical Range | What Affects It |
|---|---|---|
| Standard seamless aluminum replacement | $8–$14 per linear foot | Includes removal; higher for two-story homes in Buckhead |
| Copper gutter replacement | $18–$28 per linear foot | Material and labor on historic homes in Inman Park |
| Fascia board repair add-on | $150–$400 | Per affected section on older Fulton County houses |
| Six-inch upgrade from five-inch | $2–$4 per linear foot premium | For homes needing extra capacity in heavy-rain zones |
Ranges are typical for Georgia and confirmed with an exact written quote before any work starts.
How it works
- 1
On-Site Assessment
Measure existing gutters, check fascia condition, and note drainage patterns on the specific lot in the target Atlanta neighborhood.
- 2
Old System Removal
Carefully take down old gutters and downspouts while protecting landscaping and checking for hidden roof-edge damage.
- 3
New Gutter Fabrication and Hang
Form seamless sections on-site, install with proper pitch and hangers, then connect new downspouts.
- 4
Final Drainage Check
Test flow with water and confirm water moves away from the foundation before cleanup.
Pricing
Upfront quotes after inspection; price varies by linear footage, fascia repairs, and gutter size needed for the home.